








Dreki's backrests
Importe estimado al añadir este producto. Sujeto al destino de entrega.
Este productos se enviará: 7-10 Day Shipping
Choose options
Importe estimado al añadir este producto. Sujeto al destino de entrega.
Este productos se enviará: 7-10 Day Shipping
Importe estimado al añadir este producto. Sujeto al destino de entrega.
Este productos se enviará: 7-10 Day Shipping
Dreki Pauldrons
DescripciónNORTHERN WARRIORS WILL NEVER SURRENDER
The Dreki Pauldrons by Epic Armoury are a set of pauldrons with shoulder guards and arm protection, shielding the shoulders and upper arms. These sturdy steel plates effectively protect the back of the shoulders and the upper arm while maintaining the same imposing Nordic-inspired design common to the Dreki set. With overlapping plates, rivets, and an angular design, these pauldrons have an intimidating look, featuring Epic Dark plates running down the center of the pauldrons for symmetry. The upper arm protection consists of three overlapping steel plates joined by two leather straps, extending down the middle with an Epic Dark coated plate designed to maintain symmetry. The Dreki Pauldrons are attached via two cords that connect to the Dreki cuirass or other compatible torso armor, along with a strap on the bottom plate of the pauldron. With overlapping plates, rivets, and their sleek shape, you can feel like a fantasy Norseman, braving harsh nature and slaying ancient dragons among snow-capped peaks.
The Dreki set features two colors: the primary is Matte Polish and the secondary is Epic Dark, to highlight different aspects of the Dreki armor and showcase its Nordic-inspired roots once again. Crafted from 1 mm thick polished mild steel with premium leather straps and fittings, this piece of armor is designed to withstand the abuse of a LARP or reenactment with the usual care for leather and metal armor.
INSPIRATION
- Based on fantasy-inspired Nordic armor such as Skyrim, Dark Souls, and modern depictions in other fictional media.
Quality
- Made of 19 gauge/1 mm thick mild steel
- Rolled edges with no sharp edges
- Straps and fittings made of premium leather
- Handmade, riveted, and assembled
- Inspired by Nordic fantasy armor as seen in fictional media
This product is handmade and hand-painted and therefore unique. As a result, compared to similar item numbers, this product may have natural deviations in pattern, color, and shape, which are not considered defects or faults.
We produce our image material in a natural setting, where lighting and the environment can affect colors and contrast. Therefore, the images shown may appear different from the product you receive from us.
Measurements are all in cm unless otherwise stated.
Technical Details
Brand:
Epic Armoury
Universe:
Stalwart
Materials:
Mild steel - 1 mm/19 gauge
Position:
Shoulders
Product type:
Shoulder armor
Maintenance
Epic Armoury Metal Works products should be treated with a quality acid-free vegetable oil or wax and kept in a dry place. Metal armor containing leather parts would need separate maintenance for the leather. Read the "Leather straps and accessories" section below for leather cleaning and maintenance with leather care products.
Degreasing and preparing your armor for use
When you open your armor, you may be overwhelmed by the smell of grease and oil. Oil has been applied to protect your armor during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all oil from the plate armor pieces. It is a bit more difficult to remove all the oil from chainmail links, but it can be done in the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can remove the grease from the chainmail with mineral spirits or another solvent by spraying it onto the links. You can also choose to completely submerge your chainmail in a degreasing product and use your hands to agitate the metal in the solution; this will completely remove all oil and grease from your links. After removing the oil, be sure to dry the armor thoroughly. Strong, warm sunlight is great for drying your armor, but you can also use a hairdryer or a heat gun to speed up the process. Be careful not to overheat any leather pieces when using a heat gun.
Cleaning
Moisture is the enemy of armor and chainmail. If your armor gets wet, it is important that you dry it thoroughly as soon as possible. After handling, wearing, or after six months of storage or display, all metal must be wiped with a clean cloth. Lightly oil the clean surface with a quality acid-free vegetable oil. Alternatively, you can apply a coat of wax to the entire surface of the exposed metal. Let the wax dry for a couple of hours and then lightly buff it with a soft cloth.
Prevention and removal of rust
Store your armor in a dry place and check it every two months for signs of rust. If you find any, remove it by gently rubbing the affected spot with a slightly abrasive pad dampened with a quality acid-free vegetable oil or wax. Epic Dark products are specially treated to resist rust, but they should still be treated with oil and stored in a dry place.
Leather straps and accessories
Clean them by removing dirt with a stiff brush, then gently rub with leather soap and a clean, damp cloth until the leather appears clean. Remove the soap with a separate damp cloth to clear away any soap residue, and then use a dry cloth to wipe the remaining water off the leather.
You should always condition the leather after cleaning it, as the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax using a clean cloth, gently rubbing a small amount of oil or wax in circles into the leather. Let the leather soak in the oil before wiping it with a final clean cloth to remove excess residue.
Epic Armoury Metal Works products should be treated with a quality acid-free vegetable oil or wax and kept in a dry place. Metal armor containing leather parts would need separate maintenance for the leather. Read the "Leather straps and accessories" section below for leather cleaning and maintenance with leather care products.
Degreasing and preparing your armor for use
When you open your armor, you may be overwhelmed by the smell of grease and oil. Oil has been applied to protect your armor during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all oil from the plate armor pieces. It is a bit more difficult to remove all the oil from chainmail links, but it can be done in the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can remove the grease from the chainmail with mineral spirits or another solvent by spraying it onto the links. You can also choose to completely submerge your chainmail in a degreasing product and use your hands to agitate the metal in the solution; this will completely remove all oil and grease from your links. After removing the oil, be sure to dry the armor thoroughly. Strong, warm sunlight is great for drying your armor, but you can also use a hairdryer or a heat gun to speed up the process. Be careful not to overheat any leather pieces when using a heat gun.
Cleaning
Moisture is the enemy of armor and chainmail. If your armor gets wet, it is important that you dry it thoroughly as soon as possible. After handling, wearing, or after six months of storage or display, all metal must be wiped with a clean cloth. Lightly oil the clean surface with a quality acid-free vegetable oil. Alternatively, you can apply a coat of wax to the entire surface of the exposed metal. Let the wax dry for a couple of hours and then lightly buff it with a soft cloth.
Prevention and removal of rust
Store your armor in a dry place and check it every two months for signs of rust. If you find any, remove it by gently rubbing the affected spot with a slightly abrasive pad dampened with a quality acid-free vegetable oil or wax. Epic Dark products are specially treated to resist rust, but they should still be treated with oil and stored in a dry place.
Leather straps and accessories
Clean them by removing dirt with a stiff brush, then gently rub with leather soap and a clean, damp cloth until the leather appears clean. Remove the soap with a separate damp cloth to clear away any soap residue, and then use a dry cloth to wipe the remaining water off the leather.
You should always condition the leather after cleaning it, as the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax using a clean cloth, gently rubbing a small amount of oil or wax in circles into the leather. Let the leather soak in the oil before wiping it with a final clean cloth to remove excess residue.
At Todo Medieval we have thousands of functional and reenactment medieval products. Discover them






